3x Nuc

Also known as a queen castle, this set of parts allows you to convert a single 10-frame medium super and bottom board into three separate 3-frame nucs. Ideal as mating nucs for your queen rearing operation.

Designed for use with a wooden base constructed out of 3/4″ plywood, Cut the material to 16 1/4″ x 19 7/8″ and affix a 1″ x 19 7/8″ strip of material to each long edge and then attach the 3D printed parts using 1″ drywall screws.

Division boards are made from standard 1/8″ Masonite boards cut to 6 13/16″ x 17 7/8″.

Use burlap cut to 22″ square as an inner cover to prevent queen interaction between the nucs.

Since the lengths of several of the components are larger than the average consumer-grade printer bed size, versions are provided for both small- and larger-scale 3D printers.